The first number to check is your lift, not the wheel color
The 15" Spyder combo looks like a straightforward wheel upgrade, but the tire is what changes your cart's stance. The GTW Fusion GTR measures 22" tall and 8.5" wide, and the product record states plainly that a minimum 5" lift kit is required to accommodate this street tire. If your cart is still at stock height, this set is not a bolt-on upgrade—plan the lift first or choose a smaller combo.
That lift requirement is the single biggest constraint in the listing, and it applies regardless of which finish or lug-nut variant you select. The wheels and tires arrive mounted and ready to install, but that does not remove the clearance requirement.
What the Spyder and Fusion GTR combo actually includes
- 15" Spyder Wheels with Fusion GTR 215/40-R15 Street Tires - Set of 4⎮GTW® - Choose Your Finish: Set includes four 15" Spyder wheels, four GTW 215/40-R15 steel-belted radial street tires, four SS center caps, and sixteen black lug nuts. You get a complete mounted set rather than piecing together wheels, tires, caps, and hardware separately.

15" Spyder Wheels with Fusion GTR 215/40-R15 Street Tires - Set of 4⎮GTW® - Choose Your Finish - 15" Spyder Wheels with Fusion GTR 215/40-R15 Street Tires - Set of 4⎮GTW® - Choose Your Finish: Wheel size is 15" x 7" with a 4x101.6mm (4x4) bolt pattern and ET-15 (3+4) offset. These are the fit numbers to compare against your cart's hubs and clearance before ordering.
- 15" Spyder Wheels with Fusion GTR 215/40-R15 Street Tires - Set of 4⎮GTW® - Choose Your Finish: Tire is 22" tall and 8.5" wide, with a maximum load of 665 lbs. per tire at 30 psi and a 4-ply radial construction. The height drives the lift requirement, while the load rating tells you what the set is rated to carry per corner.
Bolt pattern and offset: the numbers that decide fit
The Spyder wheel uses a 4x101.6mm (4x4) bolt pattern, which is the common four-lug pattern for many golf carts, and an ET-15 (3+4) offset. The listing lets you select your cart make so the correct lug nuts are sent—the variants cover Yamaha/STAR EV metric 12mmx1.25, Club Car/EZGO/ICON standard 1/2x20, and GEM Car metric 12mmx1.5. Getting that selection right matters because the included black lug nuts are matched to your cart type.
The product record lists Club Car, EZ-GO, and Yamaha fitment fields, but the supplied evidence does not spell out model-year ranges or trim exceptions. Treat the 4x4 pattern and the 5" lift requirement as the baseline checks, and confirm your specific model's hub and clearance before you commit.
Finish options and how they change the look
The Spyder wheel comes in four finishes, and the lug-nut variant you choose should match the wheel finish for a consistent look.
- Black Machined: A black wheel with machined accents—the variant listing pairs this with a Black/Machined lug-nut option.
- Full Matte Black: An all-black look that pairs with the Matte Black lug-nut variant.
- Black with Red Clearcoat: Adds a red tint over black; the matching lug-nut variant is listed as Black/Red.
- Black with Blue Clearcoat: Adds a blue tint over black; the matching lug-nut variant is listed as Black/Blue.
Street tire behavior versus turf and all-terrain
The Fusion GTR is described as a steel-belted radial street tire in 215/40-R15. That makes it a natural fit for paved paths, roads, and cart-friendly communities where a smooth-rolling tire is the priority. It is not presented as a turf or all-terrain tire, so if you regularly cross soft grass, gravel, or uneven ground, weigh whether a street-focused radial matches your typical use.
The 22" height and 8.5" width also affect how the cart sits and steers, and the 5" lift requirement is a direct consequence of that size. If you want the 15" look without lifting, this is the wrong combo—not a matter of preference but of clearance.
What the listing does not settle before you buy
The supplied record does not include model-year fitment ranges, speed ratings, or tread-wear figures for the Fusion GTR, and it does not detail installation steps beyond noting the set arrives mounted. Those gaps are decision limitations, not confirmed absences from the full manufacturer documentation. Use the confirmed numbers—4x101.6mm bolt pattern, ET-15 offset, 22" tire height, 5" minimum lift, 665 lbs. per tire at 30 psi—as your checklist, and confirm anything else with the seller before ordering.


