Rear Seat Arm Rest with Cup Holder: Fit and Install Tips
By GOLFCARTSTUFF.COM™ | Golf Cart Wheels, Tires, Lights | Published: 2026-10-31
Category: How-to Guides
Add comfort and a secure drink spot to your rear seat with a cushioned arm rest set. Follow these fit checks and installation steps for Club Car, EZGO, and Yamaha carts.
Quick answer
A universal rear seat arm rest set like the Black Golf Cart Rear Seat Cushioned Arm Rest w/ Cup Holder mounts to the rear seat frame or handrail area and adds comfort plus a secure cup holder. Check your cart's rear seat structure and hardware clearance before ordering, then follow the steps below for a clean install.
Why rear seat passengers notice the difference
Rear-facing seats often leave passengers holding drinks or bracing on turns. A padded arm rest with an integrated cup holder gives them a place to rest their arms and set a drink, which makes short trips and long rides more comfortable. The set is listed as fitting all Club Car, EZGO, and Yamaha carts, but universal fit means you should still verify your specific rear seat setup.
When a universal arm rest is not the right choice
If your cart has a custom rear seat with unusually thick cushions or a non-standard frame, a universal set may need extra brackets or may not align with existing holes. Also, if you already have molded arm rests with cup holders built into the seat, adding another set may crowd the seating area. In those cases, measure first or consider a model-specific option.
Installation steps and checkpoints
- Confirm your rear seat frame: Look at how your rear seat is mounted. Most aftermarket rear seats have a metal frame or handrail where arm rests can attach. Check for flat mounting surfaces or existing holes on both sides. If your seat has no accessible frame or handrail, you may need additional brackets not included in the set.
- Test-fit the arm rest position: Hold each arm rest in place before drilling. Sit in the rear seat to check that the cushion height feels comfortable and the cup holder is within easy reach. Mark the hole locations with a pencil or marker. A comfortable height for one passenger may differ for another; aim for the middle of the seat cushion.
- Drill pilot holes: Use a drill bit slightly smaller than your mounting screws. Drill slowly to avoid cracking plastic or stripping metal. If your frame is plastic, start with a very small bit and work up. Wrap tape around the drill bit to mark the correct depth and avoid drilling through the frame.
- Mount the arm rests: Attach each arm rest with the provided screws or bolts. Tighten them snugly but do not overtighten, especially if mounting into plastic. Check that the arm rest is stable and does not wobble. If the arm rest shifts, add a washer or use a slightly larger screw; do not force it.
- Check cup holder clearance: Place a typical cup or bottle in the holder. Make sure it does not interfere with the seat cushion or the passenger's legroom. Adjust the arm rest angle if needed before final tightening. Tall cups may hit the seat back; test with the cup you plan to use most often.
- Final safety check: Push and pull each arm rest firmly to confirm it is secure. Recheck screws after the first few rides, as vibration can loosen them. Add a drop of thread-locking compound to metal-to-metal screws if you notice loosening.
Product facts
- Black Golf Cart Rear Seat Cushioned Arm Rest w/ Cup Holder Set - Fits all Club Car, EZGO, Yamaha Carts!: Includes a cushioned arm rest set with cup holder, designed to fit all Club Car, EZGO, and Yamaha carts. This broad compatibility means you can likely use it on your cart, but you should still confirm your rear seat frame style before installing.
Black Golf Cart Rear Seat Cushioned Arm Rest w/ Cup Holder Set - Fits all Club Car, EZGO, Yamaha Carts!
