Match the mat to your Yamaha before anything else
The Xtreme Mats overlay is laser-measured for the Yamaha Drive G29 and Adventurer from 2007 through 2016. If your cart falls outside that window, or you are unsure which Yamaha platform you have, stop here and confirm the model and year first. The mat is a one-piece overlay that runs from the dash down to the base of the seat, so a different floor shape will not line up with the pedal cutouts or seat base.
One detail deserves attention before you order: this model mat does not include a hole for the horn button. Check where your horn button sits on the factory floor. If it is in the mat's coverage area, plan around that rather than assuming the mat will accommodate it.
What the Xtreme Mats record confirms
- Xtreme® Mats Golf Cart Floor Mat - Yamaha Drive G29 / Adventurer Models (2007-2016): Application: Yamaha Drive G29 (2007-2016) and Yamaha Adventurer (2007-2016) This is the fit boundary. Confirm both model and year before ordering.

Xtreme® Mats Golf Cart Floor Mat - Yamaha Drive G29 / Adventurer Models (2007-2016) - Xtreme® Mats Golf Cart Floor Mat - Yamaha Drive G29 / Adventurer Models (2007-2016): Full coverage overlay style mat protects factory flooring from dash down to the base of the seat The mat sits over your existing floor rather than replacing it, so the factory surface stays underneath.
- Xtreme® Mats Golf Cart Floor Mat - Yamaha Drive G29 / Adventurer Models (2007-2016): Laser-measured for a snug fit around pedals and seat base The pedal openings and seat-base edge are the areas to check first when you test-fit.
- Xtreme® Mats Golf Cart Floor Mat - Yamaha Drive G29 / Adventurer Models (2007-2016): This model mat does not include a hole for the horn button If your horn button is on the floor, this is the one compatibility detail that could affect your install.
Installing the mat with the XtremeClip
The supplied record confirms the mat uses a patented design with a custom XtremeClip and that securing it requires no tools. It does not include a step-by-step procedure, so treat the sequence below as a practical order of checks rather than a manufacturer instruction.
- Clear and dry the factory floor: Remove loose sand, leaves and grit from the floor area the mat will cover. The diamond pattern is designed to channel sand and water, but starting with a clean surface helps the mat sit flat.
- Test-fit before securing: Lay the mat in place and check the pedal openings and the seat-base edge. The laser-measured fit should align around the pedals; if it does not, recheck that you have the correct model and year.
- Confirm the horn-button area: Because this mat has no horn-button hole, look at how the mat lies over that spot before you commit to the clip position.
- Secure with the XtremeClip: The custom clip is designed to hold the mat without tools. Follow the clip placement that matches your cart's floor; the supplied record does not specify a torque or drilling step, so do not add one.
- Check pedal travel and seat-base clearance: After securing, press each pedal through its range and confirm the mat edge at the seat base sits as intended. The 8mm thickness is part of the mat's construction, so make sure nothing catches.
Choosing a trim color
The mat is available in four color options. Color is the only variant listed, so the fit and coverage are the same across choices.
- Red Trim: A colored edge option for carts with red accents.
- Blue Trim: A colored edge option for carts with blue accents.
- Grey Trim: A neutral edge option that suits most factory interiors.
- All Black: The most subdued option, with no contrasting trim.
Keeping the mat clean between rides
The record confirms the mat is made of slip-resistant material and that the diamond pattern channels away sand and water. It does not list cleaning products or methods, so keep your routine simple and avoid anything that could damage the material.
- Rinse or wipe after dusty rides: The channeling pattern is designed to move sand and water away from where you step, so clearing the channels regularly keeps the surface useful.
- Check under the mat occasionally: Because this is an overlay, debris can collect between the mat and the factory floor. Lift the mat when you clean to clear that layer.
- Inspect the clip: The XtremeClip is what holds the mat in place. Check it stays engaged after cleaning or after passengers step in and out.
What the supplied information does not settle
The record does not include a detailed installation procedure, a cleaning product list, or a statement about fit on Yamaha models outside the 2007-2016 Drive G29 and Adventurer range. It also does not confirm whether the mat works with aftermarket floor modifications. If your cart has a non-factory floor, horn-button relocation, or a model year outside that window, confirm those details before ordering rather than assuming the mat will adapt.


