EZGO RXV LED Tail Light Replacement Guide

By GOLFCARTSTUFF.COM™ | Golf Cart Wheels, Tires, Lights | Published: 2026-10-25

Category: Product Reviews

Learn how to replace the tail lights on your EZGO RXV with LED assemblies. Step-by-step instructions, common mistakes, and product facts included.

Quick answer

Replacing your EZGO RXV tail lights with LED assemblies is a straightforward job that improves visibility and safety. Follow the steps below to swap them correctly.

Why upgrade to LED tail lights?

LED tail lights are brighter and last longer than standard incandescent bulbs. They also draw less power, which is helpful if you've added other electrical accessories to your cart. The EZGO RXV LED Tail Light Replacement Assemblies include both park/running lights and brake/turn signals in one sealed unit.

Before you start: check fitment

The LED assemblies are designed for specific EZGO RXV model years and come with a 3-pin Molex connector. You'll need to verify your cart's year and whether it runs on gas or electricity before ordering. The kit does not include screws or mounting templates, so have those ready.

Step-by-step replacement process

1. Disconnect the battery: Always disconnect the negative terminal of the battery before working on any electrical component. This prevents accidental shorts or shocks. Common mistake: skipping this step can blow a fuse or damage the new lights.
2. Remove the old tail light assembly: Unscrew the two mounting screws holding the old light to the cart body. Gently pull the assembly away to access the wiring connector. If the connector is stuck, use a small flathead screwdriver to release the locking tab. Checkpoint: note the orientation of the connector before unplugging so you can match it with the new light.
3. Install the new LED tail light: Plug the 3-pin Molex connector from the new LED assembly into the cart's harness. Press firmly until it clicks. Position the light in the opening and secure it with the original screws (or new ones if the old ones are corroded). Do not overtighten. Common mistake: overtightening can crack the plastic bezel. Snug is sufficient.
4. Test the lights: Reconnect the battery and turn on the headlights to check the running lights. Have a helper press the brake pedal to verify the brake/turn signals work. If a function is missing, check the connector pins for damage or misalignment. Checkpoint: if the brake light doesn't work, the cart's brake switch may need adjustment—not the light assembly.

Product facts

EZGO RXV LED Tail Light Replacement Assemblies (Select Model Years): Set includes a pair of bright LED tail lights with 3-pin Molex connectors, provisioned for park/running lights and brake/turn signals. You get both running and brake/turn functions in one assembly, simplifying wiring and installation.
EZGO RXV LED Tail Light Replacement Assemblies (Select Model Years)