EZGO TXT Adjustable LED Light Kit Installation (1996-2013)

By GOLFCARTSTUFF.COM™ | Golf Cart Wheels, Tires, Lights | Published: 2026-10-26

Category: How-to Guides

Step-by-step guide to installing the EZGO TXT Adjustable ALL LED Light Kit on 1996-2013 models. Includes tips on wiring, mounting, and common mistakes.

Quick Answer

The EZGO TXT Adjustable ALL LED Light Kit (1996-2013) is a straightforward upgrade that adds bright, adjustable headlights and tail lights. Follow these steps to install it yourself without a voltage reducer.

Why Choose This Kit

The Instamatic® FlexVolt™ design works on any 12-48V system, so you don't need a separate voltage reducer. The adjustable LED headlights let you aim the beam where you need it, and the included wiring harness with push/pull switch simplifies the install.

Before You Start

This kit fits both gas and electric EZGO TXT models from 1996 to 2013. Make sure your cart's battery voltage is between 12 and 48 volts. Disconnect the battery before beginning any electrical work.

Installation Steps

1. Prepare the Cart: Disconnect the battery. Remove the front cowl and rear body panels to access the mounting areas. Use the included template to mark cutout locations for the headlights. Common mistake: cutting without the template can lead to misaligned lights. Always test-fit before cutting.
2. Mount the Headlights: Cut the marked openings with a jigsaw or rotary tool. Insert the headlight assemblies and secure them with the provided fasteners. Adjust the beam angle before tightening fully. Checkpoint: ensure the amber marker lights are positioned outward for proper side visibility.
3. Install the Tail Lights: Mount the LED tail lights to the rear of the cart. Use the supplied hardware and ensure they are level. Route the wiring toward the front along the frame, avoiding moving parts. Common mistake: pinching wires under body panels. Use zip ties to secure the harness away from sharp edges.
4. Connect the Wiring Harness: Connect the headlight and tail light plugs to the main harness. Attach the push/pull switch to the dashboard. Connect the red wire to the battery positive and the black wire to the battery negative. Install the inline fuse. Checkpoint: double-check polarity before connecting. Reverse polarity can damage the LEDs.
5. Test and Adjust: Reconnect the battery. Test all lights: headlights (low/high if applicable), amber markers, and tail lights. Adjust the headlight aim using the pivot mechanism. Secure all wiring and reassemble the body panels. Common mistake: forgetting to test before reassembly. Verify all functions while panels are off to avoid rework.

What's in the Kit

EZGO TXT Adjustable ALL LED LIGHT KIT (1996-2013)- Instamatic®: Includes pair of adjustable LED headlights with amber marker lights, pair of LED tail lights, wiring harness with push/pull switch and fuse, hardware, fasteners, and light template cutouts. You get everything needed for a complete front and rear lighting upgrade in one box, saving time sourcing parts separately.
EZGO TXT Adjustable ALL LED LIGHT KIT (1996-2013)- Instamatic®