Club Car Precedent Basic LED Light Kit- Instamatic®

Club Car Precedent Basic LED Light Kit 

Kit includes:

• LED Headlight Bar and 2 LED Tail Lights 
• Wiring Sub-Harness, One In-line Fuse, and One Push-pull Switch
• Easy to mount front bumper assembly 
• Instructions and Fasteners
• Light Kits for Electric Models Newer than Mid 2008 Include Bucket Harness
• Gas Models Include Gas Harness
• This FlexVolt™ light kit is designed to operate on 12-48 volts of power. No voltage reducer required! Save time and money!

Please Note: If your golf cart has lithium batteries, you will need a voltage reducer.

Description:

This Club Car Precedent light kit includes the basic components necessary to light up the road in front of you with LED technology and make yourself visible to those approaching from behind. 

You will receive a bright, energy efficient LED headlight assembly. The headlight assembly arrives pre-mounted to a new black bumper which allows you to easily mount your front headlight and bumper assembly.

You will also receive bright LED tail lights, and the wiring Sub-Harness. This kit does not require any large holes to be cut out in the body of the cart. Mounting the tail lights only requires a small hole to be placed in the rear fenders for the wiring connector to pass through.

Please select whether you have a gas or electric Precedent. If you have an electric Precedent, you will also need to select your year of manufacture. 

In addition to the above items, you will also receive the following in your kit if you own a gas model or an electric model built after the mid-2008 model year:

Electric Carts built after Mid-2008

• This kit will also include the Bucket Harness that will need to be installed in your cart. The Bucket Harness is basically the main wiring harness that you will install from under the dash area, underneath the floor mat, through the battery compartment, and to the taillights. Electric Precedents built after mid-2008 no longer had this harness installed from the factory.

Gas Carts

• The kit designed for the gas model includes a Gas Harness Adapter that you will need to connect the existing Bucket Harness to the Sub-Harness you will be receiving in your kit.

Who is this kit for?

Designed for our customers who want simple and reliable lighting but don't need signaling capability. Primarily for customers who drive their golf carts in these locations:

• Campgrounds
• Farms
• Walking paths and trails
• Neighborhoods *when not using for street use

Looking for a street-legal upgrade? Check out our Club Car Precedent Street-Legal Light Kit

Tech Specs:

• Gas and electric cart compatible (make selection above to ensure you receive the correct wiring harnesses)
• Operating voltage: 12 volt minimum | 48 volt maximum (*no voltage reducer required)
• Operating amperage draw: 1-2 amps

Club Car Precedent Basic Light Kit Installation Overview:

Installing your Club Car Precedent light kit is a simple and straightforward process as long as you have the correct wiring harnesses (see above). As you look to install your Precedent LED light kit there are a few major steps you will need to complete.

• First, you will need to mount your new headlight and bumper in the same location as your OEM bumper. This is accomplished by removing the two screws that hold the main bumper to the frame.

• In addition to installing the headlights, you will also need to drill two small holes in the rear of your cart to allow the installation of the taillights.

• In regards to the wiring harness, you will either need to locate the pre-installed bucket harness at the taillight connections and under your dash or run a bucket harness to those locations. 

• In addition to the bucket harness, you will need to install the sub-harness wiring under your dash and if you have a gas powered Club Car Precedent, you will need to install the gas harness adapter under the dash as well. The main attachment points for the Club Car Precedent wiring harnesses are as follows:

*Depending on gas or electric cart and year of production

• Lastly, you will also need to cut a small hole in your golf cart's dash panel for the installation of the push/pull switch.

Experience what powerful lighting can do

With over 20,000 satisfied customers, Instamatic® light kits have been brightening the road ahead for over eight years. Utilizing the latest in LED and electrical technology, Instamatic® lights provide consistent and reliable lighting at a fraction of the cost of other light kits on the market. In addition, our lights are user-friendly and straightforward to install, so you can get back to the important things- enjoying your golf cart with your family and friends.

*Please Note* As we are in the process of changing over our packaging you may receive a light kit with a different Instamatic® logo than the one above.

Looking for a Deluxe Street Legal version of this light kit? Click Here

Install Video

Customer Photos