GCS EZGO RXV Folding Windshield Installation Guide

By GOLFCARTSTUFF.COM™ | Golf Cart Wheels, Tires, Lights | Published: 2026-10-27

Category: How-to Guides

Learn how to install a GCS EZGO RXV clear folding windshield. Step-by-step instructions, common mistakes, and tips for a secure fit.

Quick answer

Installing a GCS EZGO RXV folding windshield is straightforward with the right steps. Focus on protecting the acrylic surface during unpacking and aligning the hinges to avoid cracks.

Why proper installation matters

A folding windshield adds weather protection and improves your driving comfort, but a rushed install can lead to scratches or stress cracks. The GCS EZGO RXV clear windshield is made of 3/16" impact-resistant acrylic, which is durable but can scratch if you remove the protective film with a sharp tool. Taking your time with each step ensures a clean, long-lasting result.

What you'll need

Before starting, gather a Phillips-head screwdriver, a socket set (typically 10mm), and a clean, soft cloth. The windshield comes with all necessary hardware, including a 1" strut. Confirm your EZGO RXV is 2008 or newer—this windshield fits both gas and electric models.

Installation steps

1. Unpack and protect the windshield: Lay the windshield on a clean, soft surface. Do not remove the protective covering with a scraper, razor blade, or any sharp tool. Use only soap and water to clean it later. This prevents scratches that cannot be polished out. Peel the protective film by hand from a corner—never use a blade.
2. Position the strut and brackets: Attach the 1" strut to the roof support using the supplied hardware. The strut provides the mounting base for the folding mechanism. Hand-tighten bolts first to allow adjustment. Make sure the strut is centered left-to-right before tightening.
3. Mount the hinge brackets: Align the hinge brackets on the strut at the height where the windshield will fold flat. Tighten bracket bolts evenly to avoid binding the hinge pivot. If the hinge feels stiff, loosen and realign before tightening fully.
4. Attach the windshield to the brackets: Slide the windshield's pre-drilled holes over the bracket pins. Secure with the provided clips or bolts. Ensure the windshield sits squarely and does not bind against the roof or dash. Check clearance by folding the windshield halfway—any rubbing means you need to adjust bracket position.
5. Test the folding action: Fold the windshield fully up and down two or three times. It should move smoothly without forcing. Tighten all bolts to final torque once the action is smooth. A sticking fold usually means a bracket is misaligned; recheck step 3.
6. Final inspection and cleanup: Wipe the windshield with a mild soap-and-water solution using a soft cloth. Do not use ammonia-based glass cleaners—they can cloud acrylic over time. Inspect for any loose hardware after your first drive and retighten as needed.

Product details

GCS™ EZGO RXV Clear Golf Cart Folding Windshield: Clear Windshield For An EZGO RXV Golf Cart 3/16" Clear Acrylic-Impact Resistant. Fits EZGO RXV 2008+ gas or electric carts. All hardware included. 1" strut required. The 3/16" acrylic is strong enough for everyday use, but you must handle it carefully during installation to avoid scratches.
GCS™ EZGO RXV Clear Golf Cart Folding Windshield