How to Replace Club Car DS Tail Lights with LED Assemblies

By GOLFCARTSTUFF.COM™ | Golf Cart Wheels, Tires, Lights | Published: 2026-10-28

Category: How-to Guides

Learn to replace your Club Car DS tail lights with LED assemblies. Step-by-step guide covers removal, wiring, and installation tips.

Quick Answer

Replace your Club Car DS tail lights with LED assemblies by removing the old lights, checking the wiring harness, and installing the new LED units with the correct connector.

Why Upgrade to LED Tail Lights

LED tail lights are brighter and more durable than incandescent bulbs, improving visibility and safety on your Club Car DS. They also consume less power, putting less strain on your cart's battery system.

Compatibility Check for Yamaha G14-G22 Models

The same LED tail light assemblies that fit Club Car DS also work on Yamaha G14-G22 gas and electric models. However, always verify the outer dimensions and connector type before purchasing, as mounting hole patterns can vary slightly between years.

Step-by-Step Installation

1. Disconnect Battery Power: Remove the negative battery cable to prevent short circuits or accidental activation of lights during installation. Always disconnect the battery first; a common mistake is leaving it connected and blowing a fuse.
2. Remove Old Tail Light Assemblies: Unscrew the two mounting screws (typically Phillips head) holding the tail light to the rear body panel. Gently pull the assembly away to access the wiring harness. Check the condition of the mounting screws; they may be rusted and require a penetrating lubricant.
3. Disconnect the Wiring Connector: Unplug the old tail light's connector from the cart's harness. On Club Car DS, it is usually a 3-pin flat connector. If yours is different, note the wire colors for later reference. Take a photo of the wiring before disconnecting to avoid confusion during reconnection.
4. Prepare the New LED Assembly: Inspect the new LED tail light for any damage. The 3-pin Molex connector should match your cart's harness. If not, you may need an adapter (not included). Do not force the connector; if it doesn't fit, check the pin orientation or consider an adapter.
5. Connect and Mount the New Light: Plug the new LED tail light into the harness, ensuring a secure click. Align the light with the mounting holes and fasten with the original screws (or provided hardware, if any). Tighten screws evenly to avoid cracking the plastic bezel; hand-tighten only.
6. Test and Reconnect Battery: Reconnect the negative battery cable. Turn on the headlights and test the park/running lights, brake lights, and turn signals to confirm proper operation. If a function doesn't work, check the connector pins for bent or missing terminals.

Product Facts

Yamaha G14-G22 and Club Car DS Tail Light Replacement Assemblies LED: LED Tail Light Replacement Set for Yamaha G14-G22 and Club Car DS includes two bright LED tail lights with 3-pin Molex connectors. The 3-pin Molex connector simplifies wiring for park/running lights and brake/turn signals, making installation straightforward on both Club Car DS and Yamaha models.
Yamaha G14-G22 and Club Car DS Tail Light Replacement Assemblies LED