Custom Golf Cart Floor Mats: Installation & Care Guide

Quick Answer

Installing custom golf cart floor mats takes about 15 minutes with basic hand tools. Proper care involves regular sweeping and the occasional gentle wash to prevent dirt from wearing down the custom print.

How to Install and Care for Custom Golf Cart Floor Mats

1. 1. Remove the old mats and clean the floor: Take out any existing floor mats. Sweep or vacuum the floor pan to remove all dirt, leaves, and debris. A clean surface helps the new mat sit flat and prevents grit from scratching the finish. Common mistake: leaving the old mat in place. Even if it's worn, always remove it to avoid uneven surfaces.
2. 2. Unpack and position the new mat: Lay the custom Dekomats floor mat on the passenger side floor first—it's typically the simpler side. Press it into the corners and around the wheel well. Check that the mat doesn't overlap the pedals or the brake pedal pivot area. Checkpoint: verify the mat does not bunch up near the accelerator or brake pedal before setting it fully.
3. 3. Repeat for the driver side: Position the driver-side mat, ensuring the pedal openings align. Press the edges into the floor pan contours. If your cart has a floor-mounted parking brake, confirm the mat doesn't block its movement. Common mistake: forcing the mat into place. If it doesn't fit, double-check that you ordered the correct cart model. Dekomats are model-specific—there's no trimming to do.
4. 4. Secure with any included fasteners: Some Dekomats come with hook-and-loop strips or snap buttons. If yours include them, attach the strips to the mat backing and press firmly onto the clean floor pan. Snap buttons (if provided) should click into matching sockets you install on the floor. Empty unless fasteners are included—skip if none.
5. 5. Clean with mild soap and water: Mix a few drops of mild dish soap in warm water. Dip a soft brush or microfiber cloth, wring it out, and wipe the mat in the direction of the pattern. Rinse with a damp cloth and pat dry with a towel. For stubborn stains, let the soap sit for 2 minutes before wiping. Common mistake: soaking the mat. Standing water can seep through the backing and cause odor or mold. Always use a damp—not wet—cloth.
6. 6. Maintain weekly with a dry sweep: Use a soft-bristle broom or a handheld vacuum to remove loose dirt and grass clippings. Weekly sweeping prevents abrasive particles from wearing down the custom artwork. Empty

Product Facts

• Custom Golf Cart Floor Mats - Tropics | Dekomats™: Custom Golf Cart Floor Mats - Tropics are precision-tailored for EZGO, Club Car, Yamaha, ICON EV, or Advanced EV Golf Carts. A perfect fit means the mat stays in place without trimming or shifting, so you don't have to fuss with adjustments during installation.