EZGO RXV LED Light Kit Installation Guide
By GOLFCARTSTUFF.COM™ | Golf Cart Wheels, Tires, Lights | Published: 2026-10-23
Category: How-to Guides
Step-by-step instructions for installing an EZGO RXV LED light kit, covering wiring, year fitment, and common mistakes to avoid.
Quick Answer
Installing an EZGO RXV LED light kit is a straightforward DIY project that typically takes 2-3 hours. Choose a kit that matches your cart's year and power system, then follow the steps below to wire and mount everything correctly.
Why Year and Power System Matter
EZGO RXV models are split into two groups: 2008-2015 and 2016-present. While the body shape is similar, the front cowl and wiring connections can differ, so always select the correct year option when ordering. Using the wrong kit can lead to poor fitment or extra wiring work.
Electric RXV carts run on a 48-volt system, but most LED light kits are designed for 12 volts. If your cart is electric, you'll need either a single 12-volt battery or a voltage reducer. Gas models typically have a 12-volt battery already, so installation is simpler.
Installation Steps
- Prepare the Cart and Gather Tools: Turn off the cart and remove the key. Disconnect the negative battery cable. Gather a socket set, screwdrivers, wire strippers, electrical tape, and zip ties. Check that your kit includes all parts listed in the manual. Common mistake: skipping battery disconnect can cause shorts or accidental activation.
- Install the Headlights: Remove the front cowl or grille to access the headlight openings. Use the included templates to mark and cut holes if needed. Insert the headlights and secure them with the provided screws or clips. Ensure the headlights are aligned properly before tightening to avoid uneven beams.
- Mount the Tail Lights: Locate the rear tail light positions. Remove any existing covers or cut openings using the templates. Attach the tail lights and route the wires toward the front of the cart along the frame, securing with zip ties. Leave slack at connection points to prevent wire strain when the cart flexes.
- Route the Wiring Harness: Lay the wiring harness along the cart's frame, avoiding moving parts and exhaust areas. Connect the headlight and tail light plugs. Use zip ties to secure the harness every 12-18 inches. Keep wires away from sharp edges and hot components to prevent damage.
- Connect Power: For gas carts, connect the red wire to the positive terminal of the 12V battery and the black wire to ground. For electric carts, use a single 12V battery or a voltage reducer. Install the push/pull switch in the dash and connect it to the harness. On electric carts, never tap multiple batteries—use a proper reducer to avoid draining one battery unevenly.
- Test and Secure Everything: Reconnect the battery and test all lights: headlights, tail lights, brake lights, and turn signals (if applicable). Check that the switch works properly. Once verified, reinstall any removed panels and tidy up loose wires. If lights don't work, double-check ground connections and fuse before reassembling everything.
Light Kit Options for EZGO RXV
- EZGO RXV Street Legal All LED Light Kit- Instamatic®: The EZGO RXV Street Legal All LED Light Kit from Instamatic® includes two LED headlights, two LED tail lights, a wiring harness, turn signal assembly, mechanical brake switch, horn, and steering wheel column cover. This kit provides everything needed to make your RXV street-legal, including turn signals and a horn, so you can drive on public roads with confidence.
EZGO RXV Street Legal All LED Light Kit- Instamatic® - EZGO RXV Basic All LED Light Kit- RecPro®: The EZGO RXV Basic All LED Light Kit from RecPro® includes two LED headlights, two LED tail lights, and a wiring harness with a push/pull switch. It operates on 12 volts only. This is a budget-friendly option for basic visibility, but you'll need to handle 12-volt power separately on electric carts and won't get turn signals or a horn.
EZGO RXV Basic All LED Light Kit- RecPro®
