Yamaha G14-G22 LED Light Kit: Basic vs Deluxe Install Guide

By GOLFCARTSTUFF.COM™ | Golf Cart Wheels, Tires, Lights | Published: 2026-10-22

Category: How-to Guides

Compare the Basic and Deluxe Route 66® light kits for Yamaha G14-G22 golf carts and follow a step-by-step install guide with common mistakes to avoid.

Quick Answer

Choose the Route 66® Deluxe kit if you want brighter LED headlights and tail lights with a more complete package; the Basic kit is a solid, budget-friendly option for standard visibility. Both fit Yamaha G14-G22 models, and installation follows the same core steps.

Basic vs Deluxe: What's Different?

The main difference between the Basic and Deluxe Route 66® light kits is the package contents and level of brightness. The Deluxe kit includes high-intensity LED headlights and tail lights, while the Basic kit provides standard LED lighting. If you drive often at night or in low-light conditions, the Deluxe kit's extra brightness is worth the higher price. For occasional daytime use, the Basic kit is sufficient and easier on the budget.

Why Wiring Matters for Your G14-G22

Yamaha G14-G22 carts have a 12-volt electrical system, but the wiring layout can vary slightly between model years. Before you start, confirm your cart's voltage and locate the battery bank. A common mistake is connecting the light kit directly to a single battery, which can drain it unevenly. Instead, tap into the main 12-volt supply or use a voltage reducer if your cart runs on a higher voltage system.

Step-by-Step Installation

Disconnect the battery: Always disconnect the negative battery cable before touching any wiring. This prevents shorts and accidental activation. Checkpoint: Confirm the battery is fully disconnected before proceeding.
Mount the headlights: Secure the LED headlights into the front bezels using the provided brackets. Ensure they sit flush and are angled slightly downward to avoid blinding oncoming drivers. Checkpoint: Test the headlight angle before tightening all screws.
Install the tail lights: Attach the tail lights to the rear of the cart, usually on the fender or bumper. Route the wires along the frame and secure them with zip ties, keeping them away from moving parts and heat sources. Checkpoint: Leave a little slack in the wires to allow for suspension movement.
Wire the kit to the battery: Connect the red wire to the positive terminal and the black wire to the negative terminal of a 12-volt source. If your cart uses a 48-volt system, install a voltage reducer before connecting. Checkpoint: Use a multimeter to verify the voltage before connecting.
Test all lights: Reconnect the battery and turn on the headlights and tail lights. Check both high and low beams if applicable, and confirm the tail lights illuminate with the brake pedal. Checkpoint: If any light fails, recheck the wiring connections and fuses.

Product Facts

Yamaha G14-G22 Light Kit (Choose Basic or Deluxe!) | Route 66®: The Route 66® Light Kit for Yamaha G14-G22 includes high-intensity LED headlights and LED tail lights in rugged injection-molded plastic bezels. This means you get durable, bright lighting that resists cracking from impacts and weather, ideal for both on-road and off-road use.
Yamaha G14-G22 Light Kit (Choose Basic or Deluxe!) | Route 66®